how to clean petroleum based spills from carpeting in SUNOL how to clean petroleum based spills from carpeting SUNOL

how to clean petroleum based spills from carpeting in SUNOL

how to clean petroleum based spills from carpeting SUNOL

how to clean petroleum based spills from carpeting in SUNOL.Wax can come from many sources, such as from beehives, petroleum products, plants, animals, etc.
Most waxes used in candles come from petroleum byproducts, commonly referred to as paraffin wax.
It typically melts slow and allows the user to enjoy a burning candle for hours, if not days.
In order to appreciate how wax can bind with fibres, think of the characteristics of fibres.
Nylon may be more forgiving to the waxy part of the spill, but not as forgiving to the colours in the wax.
Wool is mostly a nightmare when it comes to removing wax, but it can be done.
If you decide to use this method, remember that adding heat to the fiber can also aid in driving color into the fiber, because the fiber dye sites are more absorbent during the cleaning process.
If you do not have the ability to remove wax with hot water extraction, you can use a heat transfer method with a typical clothes steam iron.
Some recommend using unprinted paper with the heat transfer process, but often a better choice is to use a white cotton towel that can be disposed of after the spotting procedure is completed.
The white towel is more absorbent and protects the carpet better from burning or melting.
Place the towel over the hardened wax and with the clothes iron on low, place the iron on the towel and allow it to soften the wax.
Gently push the iron onto the towel, allowing the newlymelted wax to absorb into the towel.
Repeat a few times as necessary to remove as much visible wax as possible.
Follow this by using a citrus gel solvent spotter to remove more of the paraffin residues, and extract.
Those colors can absorb into the carpet fibers, which means you have a dye stain to remove after the wax is removed.
No doubt the type of stain will be synthetic.
Typically these will be sodium bisulfite or sodium metabisulfite, although there are others on the market.
They work by stripping oxygen molecules from the fiber, altering the color so it becomes invisible.
According to directions, mix up your reducing agent, unless the product you choose is a onepart chemical; then wet out the fibers, working the chemical into the pile with a spatula or other spotting tool.
Using a clean, damp towel, place the towel over the stain and add heat in increments of approximately 15 seconds using a clothes iron.
If you are nervous about using this amount of heat, a steamer can be used, such as those used for removing wallpaper.
Caution: the use of any bleaching agent can remove original color.
Obtain a signed work release before proceeding.
Keep checking the results under the towel, and always keep the towel damp in order to avoid burning the carpet.
You should notice positive results after one or two applications of the reducing agent.
If you still have a lack of success, rinse the carpet again and wet out the fibers with an oxidizer, cover the area with wax paper and put a heavy object over the stain.
If this does not work, you could resort to a stronger bleaching process and recoloring of the carpet, or a bonded insert may be used.
how to clean petroleum based spills from carpeting in JOSEPHINE how to
clean petroleum based spills from carpeting JOSEPHINE